As I write this (February 2011), the line SleuthGear 'all digital' home security cameras in the following models:
- IR (with night vision goggles) Cube Clock Room
Wireless Internet Camera Surveillance
- Double Cube Clock
- Wall Clock Camera
- Mantle Clock Camera
- Bottom View Smoke Detector Camera
- Book Room
- Plant Room
- Digital Frame Camera
- Air filter> Room
There are two possibilities for the receiver - digital receiver, digital tuner with USB and RCA component outputs. The USB receiver allows you to record directly to your computer's hard drive and feeds of streaming video for remote monitoring over the Internet. The receiver allows you to RCA Component video connection to external monitoring / recording source (eg, DVR, VCR, TV, etc..) This article assumes the use of the USB receiver, because since it is not connected to the computerComputer using the software is not required if the RCA receiver.
If the device, the camera / transmitter and the receiver have been "coupled" (synchronized) to enter the factory, so it's set up for you right out of the box. If you want to use more than one camera / transmitter, you have to pair multiple devices manually. Contact technical support for assistance to couples devices. Note: You should perform no more than 2 unitsat the same time to avoid interference. You can receive feeds of up to 2 units with 1 receiver, but you can only record one camera at it that way. If you want to record 2 feeds at once, each camera / transmitter will need a special receiver connected to a dedicated computer. You can not connect two receivers on the same computer without conflict. If you want to run more than 2, we recommend all our SleuthGear Covert HVR (Hidden Video Recorder) systems that are equipped with an internal DVRSo take your recordings on an SD card hidden.
Installation
Installation Notes:
1 The 2-SecuExpress included software is only compatible with Windows XP (SP2) and Windows Vista. This is a Windows-7-patch currently under development.
2 When you install the camera / transmitter and receiver are no more than 10-15 feet away.
3 Write down the serial number on the CD-ROM as you need it during installation.
Insert the CD-ROMSecuEpress and click Install. Your work through the installation wizard. It is recommended that only advanced users deviate from the default. After finishing the installation wizard will take you to a screen where you enter the serial number of the CD and shows the security code on the screen. After entering these codes, click the Enable button. You should now see that the activation is successful. If you get an error of Microsoft DirectX, go to SecuExpressthe installation of the screen and click Install Microsoft DirectX 9
After installation is complete, connect the USB receiver into an available USB port on your computer. Then you connect the camera / transmitter unit into a 110V socket (Note: Users with 220V to 110V power supply need to 220V voltage converter Exception:. Both the IR-Cube-Clock and the non-IR-cube clock can be ordered and can be constructed will be compatible with a source of 220 V).
On your computer desktop, double-click Watcher. A windowopens and you begin to see your live video feed. Now you can position the camera / transmitter to the desired location within 300 meters of the receiver.
Learn more about this 'hidden line SleuthGear "All digital wireless surveillance' cameras kjb Security Products.
SleuthGear All Digital Cameras Covert Wireless - SecuExpress 2 Software Installationwireless internet camera surveillance
